essentials
UDOO GROVE STARTER KIT
$53.90
With this Kit you'll have all the Sensors you want to develop and realize all your ideas.
UDOO X86 METAL CASE
$26.20
The perfect companion for your UDOO X86.
M.2 DUAL ETHERNET MODULE KIT
$54.90
This M.2 dual Ethernet Module Kit allows to augment your UDOO X86 board with 2 more Gigabit Ethernet ports.
ACRYLIC CASE FOR X86
$8.80
The first, beautiful, Case for UDOO X86.
KIT M.2 WIFI/BT
$18.60
The Wifi Kit contains an M.2 Wi-Fi Intel dual band ac Wi-Fi + BT 4.2 5ghz + 2 adhesive antennas.
M.2 SSD TRANSCEND MTS600 128GB
$86.80
SATA III 6Gb/s M.2 SSD module, Transcend MTS600 series, SSD 128GB
M.2 SSD TRANSCEND MTS600 256GB
$158.30
SATA III 6Gb/s M.2 SSD module, Transcend MTS600 series, SSD 256GB
M.2 SSD TRANSCEND MTS600 512GB
$307.90
SATA III 6Gb/s M.2 SSD module, Transcend MTS600 series, SSD 512GB
LIGHT SENSOR KIT
$9.40
Use this Light Sensor Brick to augment your UDOO boards and make them more versatile.
POWER SUPPLY 12V 3A EU
$9.80
AC Power Supply Adapter DC 12 Volt 3 Amp
POWER SUPPLY 12V 3A USA
$9.80
AC Power Supply Adapter DC 12 Volt 3 Amp
must-haves
7INCH HDMI/USB DISPLAY/TOUCH
$65.90
The wonderful 7inch HDMI/USB Display/Touch with 1024×600 high resolution.
SCREWS AND SPACERS KIT FOR M.2 ACCESSORIES MOUNTING
$2.20
All the Screws and spacers for M.2 key B and Key E.
CPU FAN FOR X86 HEATSINK
$8.30
You need to apply the 12V DC CPU fan on the heatsink of your UDOO X86.
USB KIT
$4.30
This Kit contain a Micro USB to USB OTG Host Adapter + Micro-USB to USB Cable (50cm)
cables
CABLE HDMI TO HDMI
$7.60
The HDMI A Male to A Male Cable 2MT with UDOO Logo.
CABLE MINIDP++ TO DP
$8.80
The Cable MiniDP++ to DP with UDOO Logo.
CABLE MINIDP++ TO HDMI
$9.90
The Cable MiniDP++ to HDMI with UDOO Logo
SATA DATA AND POWER CABLES
$3.30
SATA Kit w/ SATA power cable + SATA data cable, l=10cm for UDOO X86
sensors
BAROMETER ALTIMETER TEMPERATURE KIT
$10.90
Use this Barometric/Altimeter/Temperature Sensor Brick to augment your UDOO boards and make them more versatile.
TEMPERATURE SENSOR KIT
$9.80
Use this Temperature Sensor Brick to augment your UDOO boards and make them more versatile.
HUMIDITY SENSOR KIT
$9.80
Use this Humidity Sensor Brick to augment your UDOO boards and make them more versatile.
GESTURE SENSOR KIT
$14.30
Use this Gesture Sensor Brick to augment your UDOO boards and make them more versatile.
UDOO X86 II ADVANCED PLUS
$191.00
UDOO X86 II ADVANCED PLUS
Usually ships in 2-4 days
UDOO X86 II is 10 times more powerful than Raspberry Pi 3, able to drive up to three 4K screens at the same time
Available
$191.00
excl. TAX/VAT/SHIPPING
| Cpu | CPU Intel Celeron N3160 2.24 Ghz |
|---|---|
| Emmc | 32GB eMMC storage |
| Gpu | Intel HD Graphics 400. Up to 640 MHz |
| Ram | 4 GB DDR3L Dual Channel |
UDOO X86 II ADVANCED PLUS
UDOO X86 II is the New PC: the most powerful x86 maker board ever and an Arduino™ Leonardo-compatible platform, all embedded on the same board.
On UDOO X86 II you can run all the software available for the PC world, from gaming to video streaming, from graphical editors to professional development platforms, plus all the software or the Arduino™ Leonardo world, including all the sketches, libraries and the official Arduino™ Leonardo IDE.
You won’t ever worry about lack of drivers or stuff like that. This is a true next-generation computer.
It is based on Quad Core 64-bit new-generation x86 processors made by Intel®, designed for the PC domain. Prodigious processors concentrated in 14 nm, with an amount of energy consumption of 5 or 6 Watt.
The board can be powered by a DC-jack with a standard 5.5mm/2.1mm barrel jack, internal positive, Voltage 12V ± 5%. This is not included. Alternatively, power can be provided though the VIN pin located on the header.
UDOO X86 II ADVANCED PLUS includes Screw/Spacers to mount the M.2 SSD and M.2 Wifi/BT.
List of Components:
- 1x UDOO X86 ADVANCED PLUS
- 1x M.2 Key B (2260) kit:
1x flat head screw M3x12mm
1x round spacer 6mm
1x washer 0.5 mm
1x nut M3
- 1x M.2 Key E (2230) kit:
1x flat head screw M3x8mm
1x round spacer 2mm
1x washer 0.5 mm
1x nut M3
You can check out our Kickstarter Campaign.
On UDOO X86 II you can run all the software available for the PC world, from gaming to video streaming, from graphical editors to professional development platforms, plus all the software or the Arduino™ Leonardo world, including all the sketches, libraries and the official Arduino™ Leonardo IDE.
You won’t ever worry about lack of drivers or stuff like that. This is a true next-generation computer.
It is based on Quad Core 64-bit new-generation x86 processors made by Intel®, designed for the PC domain. Prodigious processors concentrated in 14 nm, with an amount of energy consumption of 5 or 6 Watt.
The board can be powered by a DC-jack with a standard 5.5mm/2.1mm barrel jack, internal positive, Voltage 12V ± 5%. This is not included. Alternatively, power can be provided though the VIN pin located on the header.
UDOO X86 II ADVANCED PLUS includes Screw/Spacers to mount the M.2 SSD and M.2 Wifi/BT.
List of Components:
- 1x UDOO X86 ADVANCED PLUS
- 1x M.2 Key B (2260) kit:
1x flat head screw M3x12mm
1x round spacer 6mm
1x washer 0.5 mm
1x nut M3
- 1x M.2 Key E (2230) kit:
1x flat head screw M3x8mm
1x round spacer 2mm
1x washer 0.5 mm
1x nut M3
You can check out our Kickstarter Campaign.
| Processor | CPU Intel Celeron N3160 2.24 Ghz |
|---|---|
| Cores | 4 |
| Memory | 4 GB DDR3L Dual Channel |
| Graphics | Intel HD Graphics 400 Up to 640 MHz 12 execution units |
| Video Interfaces | 1x HDMI 2x miniDP++ connectors |
| Mass Storage | 32GB eMMC storage Standard SATA connector M.2 Key B SSD slot Micro SD card slot |
| Networking | Gigabit Ethernet connector M.2 Key E slot for optional Wireless modules |
| Usb | 3 x USB 3.0 type-A sockets |
| Multimedia | HW Video decode: H.265/HEVC, H264, MPEG2, MVC, VC-1, WMV9, JPEG, VP8; HW Video encode: H.264, MVC, JPEG |
| Audio | HD audio codec ALC 283CG Microphone + Headphone combo connector Preamplified speaker output S/PDIF output |
| Other Interfaces | IR interface LPC - 2 x I2C - GPIOs - Touch Screen Management signals on expansion connector RTC Battery + Connector Included |
| Power Supply | DC IN Jack 12V 3A |
| Operating System | Windows 10, 8.1, 7 Any Linux Distribution for X86 platform Android |
| Dimensions | 120 mm x 85 mm - 4.72 inch x 3.35 inch |
| Microcontroller | ATmega32U4 |
| Arduino Other Interfaces | 1 UART 1 x i2C 1 x SPI |
| Arduino Pinout | Arduino Leonardo-compatible and compatible with most arduino shields 5V compliant |
| Digital Pins | Up to 23 x digital I/O (7 PWM) |
| Analog Pins | 12 x Analog input |
| Campo Note | The communication between the Braswell SoC and the ATmega32U4 Microcontroller goes through an internal USB interface just like Arduino Leonardo boards connect to external PCs. |
Check items to add to the cart or
-
![ACRYLIC CASE FOR X86]()
ACRYLIC CASE FOR X86$8.80 excl. TAX/VAT/SHIPPING -
![CPU FAN FOR X86 HEATSINK]()
CPU FAN FOR X86 HEATSINK$8.30 excl. TAX/VAT/SHIPPING -
![UDOO X86 METAL CASE]()
UDOO X86 METAL CASE$26.20 excl. TAX/VAT/SHIPPING -
![KIT M.2 WIFI/BT]()
KIT M.2 WIFI/BT$18.60 excl. TAX/VAT/SHIPPING -
![UDOO GROVE STARTER KIT]()
UDOO GROVE STARTER KIT$53.90 excl. TAX/VAT/SHIPPING -
![POWER SUPPLY 12V 3A EU]()
POWER SUPPLY 12V 3A EU$9.80 excl. TAX/VAT/SHIPPING -
![POWER SUPPLY 12V 3A USA]()
POWER SUPPLY 12V 3A USA$9.80 excl. TAX/VAT/SHIPPING -
![M.2 DUAL ETHERNET MODULE KIT]()
M.2 DUAL ETHERNET MODULE KIT$54.90 excl. TAX/VAT/SHIPPING -
![M.2 SSD TRANSCEND MTS600 128GB]()
M.2 SSD TRANSCEND MTS600 128GB$86.80 excl. TAX/VAT/SHIPPING -
![M.2 SSD TRANSCEND MTS600 256GB]()
M.2 SSD TRANSCEND MTS600 256GB$158.30 excl. TAX/VAT/SHIPPING -
![M.2 SSD TRANSCEND MTS600 512GB]()
M.2 SSD TRANSCEND MTS600 512GB$307.90 excl. TAX/VAT/SHIPPING -
![7INCH HDMI/USB DISPLAY/TOUCH]()
7INCH HDMI/USB DISPLAY/TOUCH$65.90 excl. TAX/VAT/SHIPPING -
![CABLE HDMI TO HDMI]()
CABLE HDMI TO HDMI$7.60 excl. TAX/VAT/SHIPPING -
![CABLE MINIDP++ TO HDMI]()
CABLE MINIDP++ TO HDMI$9.90 excl. TAX/VAT/SHIPPING -
![SCREWS AND SPACERS KIT FOR M.2 ACCESSORIES MOUNTING]()
SCREWS AND SPACERS KIT FOR M.2 ACCESSORIES MOUNTING$2.20 excl. TAX/VAT/SHIPPING -
![USB KIT]()
USB KIT$4.30 excl. TAX/VAT/SHIPPING -
![GESTURE SENSOR KIT]()
GESTURE SENSOR KIT$14.30 excl. TAX/VAT/SHIPPING -
![HUMIDITY SENSOR KIT]()
HUMIDITY SENSOR KIT$9.80 excl. TAX/VAT/SHIPPING -
![TEMPERATURE SENSOR KIT]()
TEMPERATURE SENSOR KIT$9.80 excl. TAX/VAT/SHIPPING -
![LIGHT SENSOR KIT]()
LIGHT SENSOR KIT$9.40 excl. TAX/VAT/SHIPPING -
![BAROMETER ALTIMETER TEMPERATURE KIT]()
BAROMETER ALTIMETER TEMPERATURE KIT$10.90 excl. TAX/VAT/SHIPPING -
![CABLE MINIDP++ TO DP]()
CABLE MINIDP++ TO DP$8.80 excl. TAX/VAT/SHIPPING -
![SATA DATA AND POWER CABLES]()
SATA DATA AND POWER CABLES$3.30 excl. TAX/VAT/SHIPPING
|
|
