UDOO NEO EXTENDED

More Views

UDOO NEO EXTENDED

$59.90
excl. TAX/VAT/SHIPPING

Availability: In stock

OR
Usually ships in 2-4 days
The single board computer born for wireless mobile IoT applications.
  • NXP™ i.MX 6SoloX applications processor with an embedded ARM Cortex-A9 core. Cortex-M4 Core
  • RAM 1GB
  • Vivante GC420 Integrated 2D/3D graphics accelerator
  • MicroSD card slot onboard. 8-bit SDIO interface

UDOO NEO EXTENDED

The single board computer born for wireless mobile IoT applications.

UDOO NEO EXTENDED is the perfect solution for wireless mobile IoT applications.

You can use it as a Headless Device, exploiting the USB and Ethernet ports and the Wireless Connectivity - a powerful Wi-Fi b/g/n and the newest Bluetooth 4.0. You can also use it as a computer, thanks to its 1GB of RAM.

The board is compatible with most Arduino shields, sensors and actuators. UDOO NEO EXTENDED is also compatible with UDOO Bricks: programmable modules, like the temperature sensor and the barometric sensor, that you can add to make UDOO NEO EXTENDED even more versatile.

UDOO NEO EXTENDED can be powered in three ways. You can use:

- A standard 12 volts power supply, we recommend this one;
- A Micro USB cable like the one we have in our USB Kit;
- Any USB battery pack available on the market.

List of Components:

- 1x UDOO NEO EXTENDED

You can check out our Kickstarter Campaign.
Additional Information

Additional Information

Processor
NXP™ i.MX 6SoloX applications processor with an embedded ARM Cortex-A9 core and a Cortex-M4 Core
Memory
RAM 1GB
Graphics
Vivante GC420 Integrated 2D/3D graphics controller
Video Interfaces
Micro HDMI interface - LVDS interface + touch (I2C signals)
Analog camera connection supporting NTSC and PAL
8-bit parallel camera interface*
Mass Storage
MicroSD card slot onboard
8-bit SDIO interface*
Networking
Wi-Fi 802.11 b/g/n,Direct Mode SmartConfig and Bluetooth 4.0 Low Energy
USB
1x USB 2.0 Type A ports
1x USB OTG (micro-AB connector)
Audio
HDMI audio transmitter
S/PIDF & I2S*
Serial Ports
3x UART ports*
2x CAN Bus interfaces*
Other Interfaces
8x PWM signals*
3x I2C interface*
1x SPI interface*
6x multiplexable signals*
LEDs
1x Green Power Status LED
2x User Configurable LEDs (Red and Orange)
Integrated Sensors
3-Axis Accelerometer
3-Axis Magnetometer
3-Axis Digital Gyroscope
1x Sensors Snap-in I2C connector
Power Supply
1x DC Micro USB 5V
1x DC Power Jack 6-15V
1x RTC Battery Connector
Operating Systems
Linux UDOObuntu2 (14.04 LTS)
Android Marshmallow 6.0.1
Dimensions
89mm x 59mm - 3.50 inch x 2.32 inch
Arduino Pinout
Arduino-compatible through the standard Arduino Uno layout and compatible with Arduino shields.
Digital I/O Pins
32 extended GPIOs (A9 dedicated)
22 arduino GPIOs (M4 dedicated)
Analog I/O Pins
6 available Pins
Note
*Available on Pin Header
Projects

UDOO NEO projects bundles

Get Started
To get started with UDOO NEO follow the link below and discover all the videos and resources to unleash all the power of your NEO.
Get Started NEO

Resources

* User need to register to site before download reserved files. Please login if you are a registered user.

Docs

* User need to register to site before download reserved files. Please login if you are a registered user.

Others

* User need to register to site before download reserved files. Please login if you are a registered user.

  UDOO NEO EXTENDED

UDOO NEO EXTENDED

UDOO QUAD

UDOO QUAD

UDOO NEO FULL

UDOO NEO FULL

 
cpu
NXP™ i.MX 6SoloX applications processor with an embedded ARM Cortex-A9 core and a Cortex-M4 Core
NXP i.MX 6 Quad + Atmel SAM3X8E
NXP™ i.MX 6SoloX applications processor with an embedded ARM Cortex-A9 core and a Cortex-M4 Core
ram
DDR3 1GB
Low Voltage 1GB DDR3
DDR3 1GB
gpu
Vivante GC420 Integrated 2D/3D graphics controller
Vivante GC 2000 + Vivante GC 355 + Vivante GC 320
Vivante GC420 Integrated 2D/3D graphics controller