UDOO DUAL BASIC
Launched and funded in 2013 on Kickstarter with the name of UDOO, UDOO DUAL and UDOO QUAD are the first single board computers of the UDOO family. Both the boards follow the same concept of an agile yet powerful next-generation computer, equipped with Linux or Android OS and enhanced by the simplicity of Arduino.
Born for educational applications, the project has sparked many interest in the world of makers and inventors, that have used the platform for the widest range of scopes, including Lunar Rovers, self-driving rovers, 3D printers and Electronic Control Units for cars. Although it is now a 6 years old baby, UDOO QUAD stays indeed among the most powerful maker boards in the market, ensuring a smooth user experience thanks to an i.MX6 processor by NXP (Quad Core for UDOO QUAD, Dual Core for UDOO DUAL), combining together an Arduino DUE-compatible platform based on a SAM3X8E and a Linux / Android computer based on a Cortex-A9.
The board can also be used as a computer for everyday use, but you’ll take the most out of it if you exploit it as an ARM dev board and/or as an Arduino-compatible board. UDOO QUAD finally is designed to be the cornerstone of an embedded Linux development kit, counting on a useful SATA port to attach an external hard disk, as well as Wi-Fi to be ready for the IoT environment.
Warning: UDOO QUAD and UDOO DUAL I/O pins are 3.3V only compliant. Providing shields with higher voltage, like 5V, could damage the board. Use only shields Arduino DUE-compatible (3.3V).
List of Components:
- 1x UDOO DUAL BASIC
You can check out our Kickstarter Campaign.
- Additional Information
Processor NXP™ i.MX6 ARM Cortex-A9 CPU Dual core 1GHz (Dual Core CPU is Dual Lite version, with only one Image Processing Unit (IPU) and without the SATA interface)
Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due)
Cores 2 Memory Low Voltage 1GB DDR3 Graphics Vivante GC 880 + Vivante GC 320 Video Interfaces HDMI interface (up to 1080p)
18/24 bit LVDS interface (up to 1920x1200) + Touch (I2C signals)
Camera connection MIPI* CSI
Mass Storage SD card slot onboard Networking Gigabit Ethernet RJ45 (10/100/1000 Mbps)
Optional WiFi Module
USB 1 x USB OTG (micro-A connector)
1 x USB 2.0 internal pin header (requires adapter cable)
2 x USB 2.0 type A ports
1 x USB to Serial interface (micro-B connector)
Multimedia Integrated graphics: each processor provides 3 separated accelerators for 2D, OpenGL® ES2.0 3D and OpenVG™ Audio Headphone and Microphone stereo 3.5 mm jacks Power Supply DC IN Jack 12V 2A Operating Systems Android Marshmallow 6.0.1
Linux UDOObuntu2 (Ubuntu 14.04)
Dimensions 110mm x 85mm - 4.33 inch x 3.35 inch Arduino Pinout UDOO® is Arduino-Compatible and features the standard Arduino™ R3 layout (1.0 pinout). Thanks to this, UDOO is fully compatible with Arduino™ shields* Digital I/O Pins 76 fully available GPIOs Analog I/O Pins 12 Analog Input Pins
2 Analog Output Pins (DAC)
Note The 76 digital communications pins are shared between the two processors. They can be switched individually as input or output via software muxing
*Please note that like the Arduino Due, UDOO® runs at 3.3V and the maximum voltage that the I/O pins can handle is 3.3V.
Get Started QUAD/DUAL
NXP i.MX 6 DualLite + Atmel SAM3X8E
NXP i.MX 6 Quad + Atmel SAM3X8E
NXP™ i.MX 6SoloX applications processor with an embedded ARM Cortex-A9 core and a Cortex-M4 Core
Low Voltage 1GB DDR3
Low Voltage 1GB DDR3
Vivante GC 880 + Vivante GC 320
Vivante GC 2000 + Vivante GC 355 + Vivante GC 320
Vivante GC420 Integrated 2D/3D graphics controller